Menu

+34 91 728 59 00

EspañolEspañol

Aerosols

Acro K

Open-Gear Grease

  • Cleaner non-staining base stays in place, provides protection against rust and corrosion while forming a protective barrier cushioning impact in-between meshing gears.

Chemguard

Protective Coating

  • Clear plastic protective coating wherever a waterproof protective surface is needed. High dielectric strength is ideal for use on exposed electrical terminal and conductors.

Doral

Penetrating Gel Lubricant

  • Ultra-versatile heavy-duty clear gel penetrates and lubricates. Lubricates with PTFE for extreme pressure protection.

Flush N Clean

Flush N Clean

Tecnología avanzada de limpieza de aceite

Limpia motores, cajas de engranajes, sistemas hidráulicos y compresores

  • Disuelve de forma segura los depósitos y neutraliza los ácidos
  • Extiende la vida útil del equipo y el aceite
  • Reduce las paradas y el consumo de energía
  • Trabaja mientras el equipo está funcionando
  • Adecuado para aceites minerales y sintéticos
  • No daña sellos, anillos o juntas

Hy Zinc Extra

Cold Galvanising Coating

  • Highly concentrated zinc metal finish becomes an integrated part of metal to prevent rust & corrosion.

Hydromax

Unique Premium Hydraulic Oil Improver

  • Formula enhances performance, reduces leakage, and extends service life of new and used construction equipment hydraulic oils by up to 2,000 hours.

Insta Copper

Copper-Based Anti-Seize Compound

  • Prevents thread seizure caused by excessive heat, torque and rusting. Gives thread lubrication up to 1200°C.

Download SDS
K LAST SUPER

K LAST SUPER

Lubricante en seco en aerosol

Lubricación de larga duración a altas temperaturas y condiciones de presión

  • Resiste presiones de hasta 28.000 kg/cm2 y temperaturas de hasta 400°C
  • Muy resistente al agua, grasas y aceites, productos cáusticos y la mayoría de ácidos; proporciona una película de larga duración
  • Deja una pelicula seca de lubricante, ayudando a reducir el desgaste mecánico
  • Cómodo envase de aerosol
  • Reduce el desgaste, la corrosión, excoriación, soldadura, quitar piezas de funcionamiento, extiende la vida del equipo
  • Sin disolvente clorado
  • Contiene disulfuro de molibdeno
K NATE AEROSOL

K NATE AEROSOL

Grasa multi-usos de sulfonato de calcio

Penetra profundamente en áreas difíciles de alcanzar

  • Penetra y luego se espesa, lo que permite una lubricación completa, incluso en zonas de difícil acceso
  • Alto rendimiento bajo presión extrema
  • Proporciona una lubricación efectiva a temperaturas constantes que van desde -28ºC hasta + 160ºC
  • Tiene una buena resistencia a la oxidación y a la corrosión
  • Excelente resistencia a la acción del agua

K Release

Penetrant & Release Agent with Moly

  • The best penetrant and release agent on the market! Works immediately to penetrate rust, grease, sludge and corrosion.  Penetrates deeply to free even countersunk bolts. Leaves a long- lasting moly film to prevent rust and seizure of parts.

K Release FG

Food Grade Penetrant & Release Agent

  • A powerful food grade penetrant for food equipment.

K RELEASE NF

K RELEASE NF

No inflamable, agente de desmolde en aerosol

Libera tuercas oxidadas y tornillos en segundos

  • Seguro de usar, no inflamable
  • Se puede usar en cualquier posición, en cualquier ángulo
  • Potente y de penetración rápida
  • Fortalecido con molibdeno para aumentar la lubricación
  • Penetra hasta en los microporos y en las grietas finas
  • Utiliza carburante no inflamable y agentes líquidos penetrantes no inflamables

Lexite NF

Non-Flammable Cleaner & Degreaser

  • Quickly dissolves and flushes away grease, oils and soils without disassembly. Can be used on electrical and electronic equipment.

LUBRA K AHT AEROSOL

LUBRA K AHT AEROSOL

Lubricante de altas temperaturas para cadenas y cables

Base sintética sin silicona

  • Los aditivos anti-desgaste proporcionan una lubricación continua en lugares críticos de desgaste y estrés para reducir la fricción
  • Proporciona una excepcional resistencia a la corrosión y extiende la vida útil
  • Opera en un amplio rango de temperaturas (-20°C a + 280°C)
  • Penetra hasta el núcleo del cable y hasta los pasadores de la cadena

Lubra K AHT FG

Food Grade, High Temperature Synthetic Chain & Cable Lubricant

  • Effective chain & cable lubrication for the extreme conditions found in the food grade industry. NSF H1 certified.

Lubra K CC

Chain & Cable Lubricant with Moly

  • Lubrication penetrates to the core to provide continual protection to critical stress areas, protects against rust and corrosion, clings to chains and cables to eliminate sling off and forms a durable outer barrier between the chain or cable and the elements.

Lubra K LS

Food Grade General Purpose Lubricant

  • Thin, clear lubricant film that will not sling off or break down even in water, steam or under heavy loads.

Lubra K TX Super

Dry Film Lubricant & Release Agent

  • Dry film lubricant & release agent with PTFE Excellent lubricant and release agent for a variety of uses where a smooth, quick drying, slick surface is needed. Wide operating temperature range (from -240°C to +250°C).

Nat Sil Extra Aerosol

Multi-Purpose Silicone Mold & Surface Release Agent

  • Multi-Purpose Silicone Mold & Surface Release Agent Polysiloxane mold release agent that waterproofs, rustproofs, insulates and preserves a variety of materials.

NC 123 Extra Aerosol

Moisture Removing Anti-Corrosion Compound

  • Displaces water with a continuous film, seals against future water problems. Can be used on electrical equipment.

Nikke Lock Oil

PTFE Lock Lubricant

  • A clean pocket sized penetrating, convenient synthetic oil that continues to work in extreme cold temperatures. Works up to -42°C.

No Stop

PTFE Dry Lubricant & Release Agent Aerosol

  • Lubricates without staining or attracting dust and lint.

NSL 01 Aerosol

Heavy Duty Solvent Degreaser

  • Penetrates and dissolves tough grease and soils from hard to reach parts.

Omnicool

Multi-Purpose, Extreme Pressure Cutting Fluid

  • All in one formula combines cooling action with lubrication to provide superior performance on even the most difficult operations and hardest metals.

Premalube Xtreme FG Aerosol

Food Grade, Aluminium Complex NLGI #2 Aerosol Grease

  • Food Grade, Aluminium Complex NLGI #2 Aerosol Grease  NSF H1, Excellent white assembly grease for food processing  equipment with all of the same great properties as our bulk.

Prob Solv

Heavy Duty Gear & Bearing Oil Improver

  • Performance booster for use in gearboxes.

Sila K Super

Multi-Purpose Silicone Release Agent

  • Space age release agent that waterproofs, insulates and preserves a variety of materials. NSF H1 approved for food use.

Stay Put

Stainless Steel Coating

  • Shiny metallic surface that withstands extreme temperatures and environments.

Un Lock Aerosol

High Temperature, Anti-Seize Lubricating Compound

  • Works long after other anti-seize and lubricating compounds have  worn away and hardened. Works in temperatures up to 1200°C.

Download SDS

Unlock 2000 Aerosol (Un Lok 2000)

Food Grade, High Performance Anti-Seize Compound

  • Non-staining white formula provides superior protection against  seizing, galling, rust, and corrosion for nuts, screws, fittings, and  other metal parts. Works in temperatures up to 1260°C. NSF H1  certified.

  • Available in aerosol and bulk formats

Download SDS

Verti Cling

Powerful Foaming Degreaser

  • Effective for the removal of heavy soils like grease, grime, tar, asphalt and adhesive residue.

Waylube Super Aerosol

Slideway Lubricant

  • Clings to ways for long term lubrication, reducing wear and extending equipment life.

Zoff

Cleaner For All Non-Porous Surfaces

  • For powerful and fast grafitti removal.

© Copyright 2019 NCH (UK) Ltd. Todos los derechos reservados. Chem-Aqua, Wastewater, Parts Cleaning, Maintenance, Lubricants, Partsmaster y Facilities son subdivisiones de NCH Europe.