Although often neglected, we all know that proper grease-lubrication of industrial equipment and machinery makes everything run smoother, more efficiently and minimises problems associated with high temperature, friction, wear, rust, corrosion and extreme pressure. Despite the fact that at least 70 per cent of greases are lithium based, newer calcium sulfonate greases offer superior multi-purpose performance. But with a multitude of products on the market, how do you choose between them?

Here the lubricants and fuel additives platform of NCH, gives three key tips for choosing your grease.

1. Make sure your grease can stay put under heavy loads

We ask a lot of multipurpose greases nowadays. From ultra clean and dry air conditioned environments and general machinery in industrial plants, to severe outdoor applications where conveyors, pulleys and bucket wheels exert heavy loads on machinery, your grease must perform.

When put under these strains, lesser greases will quickly lose their structural integrity and get squeezed out of equipment under heavy loading. Whether it's the bearing on an industrial pump or a bucket pin on an industrial digger, heavy loads can cause grease to leak and squeeze out under the force of gravity and high pressure.

To overcome this, NCH developed K NATE, a calcium sulfonate grease with unique properties. Made using a blend of tackifier additives, K NATE contains adhesive polymers that allow K NATE to stick to surrounding metal as well as cohesive polymers that allow it to stick to itself. This formula means the grease can minimise the effects excessive wear and heavy load shock conditions, withstanding a weld load in excess of 800kg on a four ball machine.

2. Make sure your grease can handle extreme heat and friction

Most of us know that over 70 per cent of machine wear occurs on cold startup. Before your lubricant has chance to circulate and coat the internal surfaces, metal-to-metal contact causes friction and temperatures can very quickly reach over 1,000 degrees, welding together core components.

Extreme contact temperatures, combined with operating and ambient heat in applications such as steel mills, where equipment such as blast furnaces, electric arc furnaces, casting machines, cranes, transfer cars and mill motors, can cause catastrophic failure. Ultimately, this leads to extended down-time, charred grease and unprotected bearings.

When choosing a grease that can perform as you need it to under heat and friction, look for a grease that has a high working temperature and dropping point, along with other extreme pressure agents. For example, K NATE provides effective lubrication from -30 to 200 degrees centigrade continuously and up to a maximum of 230 degrees centigrade intermittently. To top this off, K NATE offers a dropping point – the point at which a grease moves from semi-solid to liquid form – of 288 degrees centigrade. This high dropping point reduces grease consumption, providing protection for longer.

Heavy loads, combined with high temperatures and friction lead to extreme pressure (EP). That’s why we developed our grease with EP agents that react to heat, relieving pressure by introducing a thin lubricating film. This film fills in the gaps between asperities (the rough projections present on metallic surfaces at an atomic scale) even on surfaces polished to a mirror surface. This lubricating film allows surfaces to glide over each other, reducing wear and elongating component life.

3. Make sure your grease can handle contamination

Water, dust and corrosion are the three biggest killers of industrial equipment and no matter how much you try to minimise ingress, over time, your grease will come face to face with these problems.

If you've ever repaired, serviced or replaced a motor, you'll be familiar with the damage that can be caused by dust and airborne particles. Especially susceptible are applications such as packaging, card and paper processing plants where, despite the best ventilation and ingress protection, dust can infiltrate motor housings over time, clogging air filters and overheating windings.

Likewise, dirt and other organic matter can mix with grease to become an abrasive powerful enough to score bearings, cause pitting on gear teeth, and lead to long term microbial growth.

Combined with exposure in outdoor environments, or steam and condensation in indoor plants, water washes away grease like there’s no tomorrow, leaving surfaces unprotected. This is another reason why continuous production plants can never be truly shut down, instead being serviced in a phased process. If the plant is shut down entirely, lubrication dissipates, corrosion sets in and equipment seizes up when the system is restarted.

To prevent these problems, K NATE is specifically formulated with excellent water resistance that limits water-washout to just 0.5 per cent, where standard grease exhibits over five per cent, along with corrosion inhibitors that form a protective barrier against external and internal contaminants.

Even if you don’t neglect the regular maintenance and repair of your industrial machinery and equipment, using a high quality grease will make all the difference. From higher temperature and load endurance to a more sophisticated ability to combat contamination a good grease makes all the difference. So remember, choose a grease that can handle the pressure, handle the heat and handle the contamination.